Restricted item

Checking...

Yes... We can ship this to {{ stateToCheck }}.

No... We cannot bill or ship this to {{ stateToCheck }}.

Invalid request or service not available. Please try again.

PIKE ARMS®
.22LR FAKE SUPPRESSOR
(FAKE SILENCER)THREADED 1/2x28 TPI
- FOR RIFLE OR PISTOL

PIKE ARMS® .22LR FAKE SUPPRESSOR (FAKE SILENCER)1/2x28 TPI - FOR RIFLE OR PISTOL

Want the suppressor look without all the paperwork hassle and transfer tax expenses? Our .22 LR Fake Suppressor is as close to a real suppressor as you can get without paying the tax stamp. Its CNC precision machined from solid aluminim with a durable hard black anodized finish and its professionally laser engraved identically to our real NFA registered suppressors.

Since its a fake suppressor, the sound is not reduced and bullet impact is not changed when installed on the firearm when firing. Many customers do prefer the weight and balance improvement that the suppressor provides. Its perfect for use on 22LR rifles or pistols and will work on any .22LR rifle or pistol that has the barrel correctly threaded 1/2x28 TPI.

Don't let the low price fool you... We are the source and manufacture 1000's of fake suppressors to supply other major manufacturers, distributors and resellers. You won't find a better fake suppressor at ANY price.  Order one today and get your gun lookin' right!

 

Ordering Restrictions: No sales where prohibited.  Although this item is not federally restricted, it is the buyer's responsibility to ensure they are in compliance with all state and local regulations regarding purchase, possession and use.

Note: Due to the thread timing relationships between the firearm's threaded barrel or the thread adapter and then the fake suppressor, the position of the engraving on the suppressor when screwed on will randomly stop at any position and not necessarily on the right hand side as shown in the picture. Although it has rarely been an issue, we have no way to determine where the engraving will stop on your gun.

  • PRODUCT NAME .22 LR FAKE SUPPRESSOR (FAKE SILENCER) 1/2-28 TPI FEMALE THREAD
  • MANUFACTURER Pike Arms Inc.
  • CALIBER .22LR Only
  • APPLICATION ANY .22LR FIREARM CORRECTLY THREADED 1/2-28 TPI
    Such As:
    * Walther P22 (With Walther P22 Thread Adapter)
    * SIG Mosquito (With SIG Mosquito Thread Adapter)
    * Ruger 10/22 (With 10/22 Threaded Barrel) * Any 1/2x28 Threaded .22LR Barrel
  • MARKING OPTIONS Matte Black, Laser Engraved
  • DIMENSIONS 5.000 inch Long x 1 inch Nominal Diameter
  • WEIGHT 4.8 Ounces
  • MATERIAL T6 Aircraft Grade Aluminum
  • FINISH Hard Anodized, Black
  • RESTRICTIONS Not federally restricted. Not for sale where locally restricted or otherwise regulated. Verify state and local regulations and restrictions, if any, prior to ordering.

Overall Rating: 4.8 out of 5 5 reviews

Review This Product

By Paul Of
I love this fake suppressor. I didn't want to spend the money or go through the hassle of getting a real one (maybe one day!) but really liked the look of the gun with a suppressor on it. Most of my shooting buddys think its real until they check it out closely. If you have a P22, this is worth the money.
By Ben Of Nevada
I purchased this product mainly for an added counter weight on my threaded barrel. It looks great and is very functional. Love this product and would buy again.
By G Of Missouri
Bought this to go on the buisness end of my Smith and Wesson 15-22. Lemme tell ya, it really finishes off the look of the rifle excellently. I did not have the barrel cut down when it was threaded, and it looks great even full length. It does help balance out the rifle out with an EoTech sitting on top of it.
By paul Of Washington
All I can say is when I have the SUPPRESSOR on my p22 I feel like James Bond, lol. Well made and perfect weight. love it.
By scott Of Virginia
Put it on my m&p 15-22p , looks great - excellent quality. Would be better if avail w/out engraving, mine is upside down. Not a big deal. Fast shipping!

Frequently Asked Questions For

.22LR FAKE SUPPRESSOR
- FREQUENTLY ASKED QUESTIONS
  1. Does this fake suppressor come apart? Can I break the welds, cut it open etc. so I can make it into an illegal suppressor? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
  2. What is the difference between a real suppressor and a fake suppressor?
  3. Can this fake suppressor easily be converted to a real suppressor?
  4. Can anyone legally own a fake suppressor?
  5. Can I shoot my fake suppressor on a fully automatic firearm?
  6. Will the fake suppressor affect my accuracy?
  7. Can I shoot my fake suppressor on multiple .22LR firearms including rifles and handguns?
  8. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
  9. Can I send Tactical Innovations my gun(s) / barrel(s) to thread?
  10. Can I use a muzzle nut coupling instead of threading my barrels for use with my fake suppressor?
  11. Can I get a fake suppressor with custom engraving?
  12. Are your fake suppressors available in additional colors other than black?
  13. When I screw the fake suppressor onto the adapter, why does the writing stop at the bottom / side / etc rather than on the right side like in the picture?
  14. Can I shoot calibers other than .22LR, such as .22WRM (magnum) and .17 RF through it?

 

1. Does this fake suppressor come apart? Can I break the welds, cut it open etc. so I can make it into an illegal suppressor? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
This FAKE suppressor can NOT be disassembled for any reason. It's solid. If it could be disassembled, it would be too easy for criminals to illegally attempt to construct an unregistered illegal suppressor. As a result, ATF would not allow the sale of a fake suppressor that could be disassembled.
(Return To Top)

2. What is the difference between a real suppressor and a fake suppressor?
Fake suppressors are the same as a barrel extensions. Since they don't make the shooting any quieter, they are not federally restricted. A real suppressor actually decreases the sound of the firearm when discharged and is therefore subject to ATF regulations.
(Return To Top)

3. Can this fake suppressor easily be converted to a real suppressor?
Of course not... Suppressors (silencers) are NFA restriced firearms and must transfer in strict compliance with federal, state and local regulations.
(Return To Top)

4. Can anyone legally own a fake suppressor?
Fake suppressors are an accessory. They are not federally restricted. Fake suppressors are the same as a barrel extension They don't make the shooting any quieter. However, state and local regulations might prohibit purchase or possession. Check state and local regulations to ensure compliance prior to ordering.
(Return To Top)

5. Can I shoot my fake suppressor on a fully automatic firearm?
Fake suppressors work the same on .22LR semi auto and fullauto firearms.
(Return To Top)

6. Will the fake suppressor affect my accuracy?
The fake suppressor should have minimal to no change on the impact of the bullet as compared to shooting with no fake suppressor for general recreational target shooting. The additional weight on the barrel will change how the barrel flexes and vibrates when fired, which could minimally change your point of impact. For general plinking, just shoot it, but before using the suppressor for hunting or other "serious" target shooting, you should re-sight the firearm with the suppressor installed to compensate for any differences.
(Return To Top)

7. Can I shoot my fake suppressor on multiple .22LR firearms including rifles and handguns?
Absolutely! That's one of the advantages of having a screw on fake suppressor. You can use it on any .22LR firearm that is correctly threaded 1/2 x 28 tpi.
(Return To Top)

8. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
We manufacture literally 1000s of fake suppressors in quantity runs and make our profit based on volume. We don't spend thousands of dollars on advertising and rely primarily on your satisfaction and referrals, and we pass the savings on you to. Dollar for dollar for price, performance, workmanship, customer service and company reputation, you will not find a better value for your money.
(Return To Top)

9. Can I send Tactical Innovations my gun(s) / barrel(s) to thread?
We currently are not taking in any barrel threading work due to peak manufacturing production demands. Most local gunsmiths aas well as machine shops should be able to correctly thread your barrel for a nominal charge. We have a list of barrel threading tips that you can provide to your gunsmith or machine shop to help ensure a perfect job.
(Return To Top)

10. Can I use a muzzle nut coupling instead of threading my barrels for use with my fake suppressor?
While the use a muzzle nut coupling instead of threading multiple barrels appears to be an inexpensive and fast solution to threading each barrel, the use of any muzzle nut coupling would void any factory complimentary repair work because as the bores of the barrels are drilled, the drill "walks" a little fron the starting end to the muzzle end. This means that the bore is never EXACTLY in the middle of the barrel, so if you clamp a muzzle coupling on the the barrel, the bore will be off center to the fake suppressor. Pistols have a greater possibility of successfully using a muzzle coupling since the barrels are not as long when they are drilled.
(Return To Top)

11. Can I get a fake suppressor with custom engraving?
We do not offer any custom engraving at this time. Your local trophy shop should be able to provide custom engraving if you need it.
(Return To Top)

12. Are your fake suppressors available in additional colors other than black?
Black with white lettering is the only color available at this time.
(Return To Top)

13. When I screw the fake suppressor onto the adapter, why does the writing stop at the bottom / side / etc rather than on the right side like in the picture?
Although its usually not an issue, there is no way to tell where the writing will stop when its screwed on. Its random based on the multiple thread timings and where the fake suppressor was engraved. You can change where the engraving stops by putting a THIN spacer between the fake suppressor and the adapter if you prefer to have it stop in a particular position. However, we have no way to ship you a fake suppressor that will have the engraving stop in any position with any greater probability than having it stop anywhere else.
(Return To Top)

14. Can I shoot calibers other than .22LR, such as .22WRM (magnum) and .17 RF through it?
Although many customers have had good experiences using their fake suppressors on firearms of calibers other than .22LR by using common sense and good judgement, the fake suppressor is not rated for any caliber other than .22LR. Other calibers, such as .22WRM (magnum) and .17 Rimfire, will have varying pressures and could damage the fake suppressor and / or cause personal injury to the shooter or bystanders, and therefore their use is not recommended and they should not be used. Safe firearm handling and use would preclude the use of any firearm or suppressor with ammunition other than that for which it was designed.
(Return To Top)

  1. Can I shoot my rifle / pistol with the fake suppressor attached?
  2. Does this fake suppressor come apart? Can I break the welds, cut it open etc. ? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
  3. What is the difference between a real suppressor and a fake suppressor?
  4. Can this fake suppressor easily be converted to a real suppressor?
  5. Can anyone legally own a fake suppressor?
  6. Can I shoot my fake suppressor on a fully automatic firearm?
  7. Will the fake suppressor affect my accuracy?
  8. Can I shoot my fake suppressor on multiple .22LR firearms including rifles and handguns?
  9. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
  10. Can I send Tactical Innovations my gun(s) / barrel(s) to thread?
  11. Can I use a muzzle nut coupling instead of threading my barrels for use with my fake suppressor?
  12. Can I get a fake suppressor with custom engraving?
  13. Are your fake suppressors available in additional colors other than black?
  14. When I screw the fake suppressor onto the adapter, why does the writing stop at the bottom / side / etc rather than on the right side like in the picture?
  15. Can I shoot calibers other than .22LR, such as .22WRM (magnum) and .17 RF through it?
  1. Can I shoot my rifle / pistol with the fake suppressor attached?
    Absolutely. The fake suppressor does not change the sound or the accuracy. It will work identically to a flash hider.
  2. Does this fake suppressor come apart? Can I break the welds, cut it open etc. ? Can this fake suppressor be disassembled for cleaning? Do the endcaps come off? Etc Etc...
    This FAKE suppressor can NOT be disassembled for any reason. It's solid. If it could be disassembled, it would be too easy for criminals to illegally attempt to construct an unregistered illegal suppressor. As a result, ATF would not allow the sale of a fake suppressor that could be disassembled.
  3. What is the difference between a real suppressor and a fake suppressor?
    Fake suppressors are the same as a barrel extensions. Since they don't make the shooting any quieter, they are not federally restricted. A real suppressor actually decreases the sound of the firearm when discharged and is therefore subject to ATF regulations.
  4. Can this fake suppressor easily be converted to a real suppressor?
    Of course not... Suppressors (silencers) are NFA restriced firearms and must transfer in strict compliance with federal, state and local regulations.
  5. Can anyone legally own a fake suppressor?
    Fake suppressors are an accessory. They are not federally restricted. Fake suppressors are the same as a barrel extension They don't make the shooting any quieter. However, state and local regulations might prohibit purchase or possession. Check state and local regulations to ensure compliance prior to ordering.
  6. Can I shoot my fake suppressor on a fully automatic firearm?
    Fake suppressors work the same on .22LR semi auto and full auto firearms.
  7. Will the fake suppressor affect my accuracy?
    The fake suppressor should have minimal to no change on the impact of the bullet as compared to shooting with no fake suppressor for general recreational target shooting. The additional weight on the barrel will change how the barrel flexes and vibrates when fired, which could minimally change your point of impact. For general plinking, just shoot it, but before using the suppressor for hunting or other "serious" target shooting, you should re-sight the firearm with the suppressor installed to compensate for any differences.
  8. Can I shoot my fake suppressor on multiple .22LR firearms including rifles and handguns?
    Absolutely! That's one of the advantages of having a screw on fake suppressor. You can use it on any .22LR firearm that is correctly threaded 1/2 x 28 tpi.
  9. The fake suppressor looks great, but how can you sell it so inexpensively compared to other companies?
    We manufacture literally 1000s of fake suppressors in quantity runs and make our profit based on volume. We don't spend thousands of dollars on advertising and rely primarily on your satisfaction and referrals, and we pass the savings on you to. Dollar for dollar for price, performance, workmanship, customer service and company reputation, you will not find a better value for your money.
  10. Can I send Tactical Innovations my gun(s) / barrel(s) to thread?
    We currently are not taking in any barrel threading work due to peak manufacturing production demands. Most local gunsmiths aas well as machine shops should be able to correctly thread your barrel for a nominal charge. We have a list of barrel threading tips that you can provide to your gunsmith or machine shop to help ensure a perfect job.
  11. Can I use a muzzle nut coupling instead of threading my barrels for use with my fake suppressor?
    While the use a muzzle nut coupling instead of threading multiple barrels appears to be an inexpensive and fast solution to threading each barrel, the use of any muzzle nut coupling would void any factory complimentary repair work because as the bores of the barrels are drilled, the drill "walks" a little fron the starting end to the muzzle end. This means that the bore is never EXACTLY in the middle of the barrel, so if you clamp a muzzle coupling on the the barrel, the bore will be off center to the fake suppressor. Pistols have a greater possibility of successfully using a muzzle coupling since the barrels are not as long when they are drilled.
  12. Can I get a fake suppressor with custom engraving?
    We do not offer any custom engraving at this time. Your local trophy shop should be able to provide custom engraving if you need it.
  13. Are your fake suppressors available in additional colors other than black?
    Black with white lettering is the only color available at this time.
  14. When I screw the fake suppressor onto the adapter, why does the writing stop at the bottom / side / etc rather than on the right side like in the picture?
    Although its usually not an issue, there is no way to tell where the writing will stop when its screwed on. Its random based on the multiple thread timings and where the fake suppressor was engraved. You can change where the engraving stops by putting a THIN spacer between the fake suppressor and the adapter if you prefer to have it stop in a particular position. However, we have no way to ship you a fake suppressor that will have the engraving stop in any position with any greater probability than having it stop anywhere else.
  15. Can I shoot calibers other than .22LR, such as .22WRM (magnum) and .17 RF through it?
    Although many customers have had good experiences using their fake suppressors on firearms of calibers other than .22LR by using common sense and good judgement, the fake suppressor is not rated for any caliber other than .22LR. Other calibers, such as .22WRM (magnum) and .17 Rimfire, will have varying pressures and could damage the fake suppressor and / or cause personal injury to the shooter or bystanders, and therefore their use is not recommended and they should not be used. Safe firearm handling and use would preclude the use of any firearm or suppressor with ammunition other than that for which it was designed.

INSTALLATION INSTRUCTIONS

Installation is fast and easy and requires no tools or gunsmithing.

1.  Ensure firearm is NOT loaded. 

2. Screw .22LR FAKE SUPPRESSOR on to firearm's existing threaded barrel.  Hand tighten until securely seated on barrel.  Do not over-torque.  Use crush washer (not supplied) to position engraving to preferred orientation if desired.

CLEANING INSTRUCTIONS

1.  Ensure firearm is NOT loaded. 

2.  Unscrew .22LR FAKE SUPPRESSOR from firearm.

3.  Remove lead and carbon from inside of .22LR FAKE SUPPRESSOR using pistol cleaning bush and bore cleaner. 

4.  Lightly oil exterior with soft cloth to remove dirt and dust.

PROP 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Related Products

SIG® 1911A1 .22LR THREAD ADAPTER
AND DISPLAY SUPPRESSOR COMBO
10/22® FAKE SUPPRESSOR
(DISPLAY SILENCER)
- NO ADAPTER REQUIRED
AR15/M16 "SHORT BARREL RIFLE"
FAKE SUPPRESSOR (DISPLAY SILENCER) THREADED 1/2x28 TPI
AR15/M16 FAKE SUPPRESSOR
(DISPLAY SILENCER)
THREADED 1/2x28 TPI
PIKE ARMS® EARTH "920" 22LR FLASH HIDER / COMPENSATOR THREADED 1/2x28 TPI FOR RUGER® 10/22® THREADED BULL BARRELS
TACTICAL INNOVATIONS® ELITE22™ RECEIVER - BLUE, 10/22® COMPATIBLE, BILLET CNC PRECISION MACHINED

Hot Sellers

PIKE ARMS® 16.5" STAINLESS STEEL - 1:16 TWIST - FLUTED - .920 BULL TARGET BARREL THREADED 1/2-28 TPI FOR 10/22® WITH THREAD PROTECTOR