PIKE ARMS® BARREL BUSHING FOR PIKE ARMS® 80% ELITE22™ RECEIVERS
- BLUE STEEL
The Pike Arms® Barrel Bushing is used to repair ELITE22™ 80% receivers that have the barrel hole drilled incorrectly. It is installed by MACHINING (not drilling) the larger diameter hole to accomodate the bushing in the correct location and then pressing the bushing into the receiver in order to save a Pike Arms 80% recevier which would otherwise have to be scrapped for barrel misalignment. In addition to machining the larger hole for the bushing, a counterbore is required to set the bushing at the correct height in the receiver. Again, YOU MUST HAVE A MILLING MACHINE TO INSTALL THE BUSHING. THE BUSHING CAN NOT BE INSTALLED WITH A DRILL PRESS.
This bushing is ONLY for Pike Arms® 80% Elite22™ receivers and will not work for takedown models.
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 
